This unit is the highest degree of accuracy of 3 in 1 machine, it is important for the machine to run stably and the product quality.
Framework
Framework
1) The stainless steel with stretched structure (reversed-drawing technology), cooperate with the ¡§O¡¨ sealing ring, that make the possibility of leakage of the parts such as bearing flat and support axle etc. down to zero.
2) The framework is welded and high quality carbon steel and dealed with anti-corrosive treatment. The surface is covered by stainless steel plate (AISI304).
3) The transmission system is settled blow the framework and driven by gear.
4) The driven gear is composed of stainless steel gear wheel and nylon gear wheel with a cross arrangement.
5) Equipped with the device of overload protection, it can guarantee the safe of the machine effectively.
6) The top and around of the Framework is enclosed by the sealing window with transparent Lucite. And an entrance of preformed hole for ozone according to the buyer¡¦s requirement.
Bottle Description
Bottle outlet star-wheel
The poking bottle is poking body star wheel.
The bottle outlet conveyor
1) The driven motor is frequency control, synchronized with the 3 in 1, prevented the bottle from turning over.
2) There is a detective photoelectric switch settled in the chain shelf. The machine stops when a bottle falls down.
Characteristic of the screwing capper as follows:
1) Introduce most advanced cap sealing technology called France ¡§ZALKIN ". With the help of expert from institute of electromechanics and mechanical engineering of Shanghai Communications University, we successfully designed. For example: I) the screwing capping head cam (the main parts which can assure the machine run stationarity), while adopting ¡§ZALKIN¡¨ technology, the expert improve the authenticity and stability of the machine focused on dynamics and kinematics. II) Screwing capping head (the main parts which can assure the capping quality), the expert improve the design of magnetic steel, this improvement can reduce the defective rate of capping better and the traditional character of easy to set and adjust the torque of screwing capping head.
2) The screwing capping head is dual-purpose design; it is suitable for flat cap and sport cap.
3) The device which can take out the reverse cap and prevent the reverse cap passing is settled in the cap-falling guide.
4) A group of photoelectric switches are settled on cap-falling guide. The machine will stop when there is no cap on the guide.
5) A bottle inlet detect switch is settled on the screwing capper.
6) There are aseptic nozzles between the transition poking wheel and filling parts to rinse the product rested in the bottleneck screw parts.
7) There is a cap-lock cylinder in the joint between the cap-falling guide and poking cap plate. It is realize that no feeding no cap.
8) By adjusting the height of the rotary parts to adapt for different bottle height.
9) The motivation of the screwing capper is derived from the driven system in the framework and passed by gear.
10) The main parts of the screwing capper are processed by the digital-control processing center
