Characteristics of machine:
This machine is primarily used in packing or unpacking glass or plastic bottles and can be used with all kinds of packing containers, plastic boxes and cardboard boxes. It is constructed from these three major components; 1. main drive unit, 2. box feed positioning conveyor, 3. bottle feed line conveyor.
This machine is primarily used in packing or unpacking glass or plastic bottles and can be used with all kinds of packing containers, plastic boxes and cardboard boxes. It is constructed from these three major components; main drive unit, box feed positioning conveyor and bottle feed line conveyor.
Main drive unit
Uses a hydraulic system to transfer pressure to the hydraulic cylinder. The forward and backward motion of the magnetic valve controlled hydraulic cylinder and drive chain wheel set causes the bottle clamper to move along the cam track completing the packing or unpacking routine.
Box feed positioning conveyor
Utilizes a knock-out chain conveyor, transmission mechanism optical switch and box stopper to complete the feeding, positioning and sending steps. When the bottle clamping action is complete, the box stopper lowers and the conveyor sends a empty box down, When it reaches the positional and the optical switch senses it presence, the box positioned and stopper immediately rises and positions the box. the bottle clamp set then places the bottles into the box. If the bottles clamp completes its starting forward motion and the box has yet to be positioned. the bottle clam set will stop and wait in the neutral
Bottle feed line conveyor
Uses a guide plate to lead the bottles onto the conveyor which lines up the bottles to prepare for packing . After their one lined up, the clamp head howlers and clamps down on the bottle, the conveyor immediately stops and the bottle stopping blocks on both sides of the air pressure cylinders push out and release. The force created by squeezing the bottle cause the bottle to be smoothly clamped and brought upwards. Then the air cylinder pulls back the stopping blocks, the conveyor continues to run allowing the bottles to be continually lined up and await packing.
Including:
This machine includes the following 2 items of main components:
(a)Case conveyor:
Case conveyor includes top chain, main drive, pe cell & case stopper. when gripping cycle finishes, the stopper is downward and then the conveyor is running to take away the cases. At this time, the stopper going upward to stop the cases to the position. When cases go to the right position, the pe cell actuates the conveyor to stop. The bottle positioning device is downward for packing. When the cycle finishes, it restarts another cycle. If the cases are not in the right position, the gripper head will be waiting in the highest point.
(b) Bottle in-feed conveyor:
the bottles travel via guide rail to the conveyor and be arrayed to the pattern for packing. The gripper head moves downward and the conveyor stops. The two side cylinders push forward to prevent any pressure occurs. When gripping the bottles, array device at bottle inlet position, it prevents bottle jamming. When the gripping cycle finishes, the cylinder retracts conveyor and it restarts to convey bottle to the correct position.
Applied to max. Bottle height: 350mm.
Applied to min. Bottle height: 150mm.
Applied to bottle neck diameter: 25 ~ 32mm.
Applied to bottle diameter: min. 52mm, max. No limits.
Applied to case dimension: min. 200 mm (l) x 200 mm (w) x 10mm (h).
Pneumatic clamping system
During clamping , the compressed gas enters the clamp head from FRP line (1) forces the rubber sleeve (3) to exert pressure on the three holes in the mold sleeve (2) and closing tightly round the neck of the bottle which holds steady and clamps the bottle. Once released, the gases from the clamping head is expelled through the FRP line to the fast discharge system, the rubber sleeve regains its original shape so that ti can quickly the bottle.
Capacity: 8 cases per minute up.
600ML 250ML 330ML¡G4¡Ñ6
750M L 1 Liter¡G3¡Ñ4 or 3¡Ñ2
Bottle Size: PET Bottle 600ml,Glass Bottle 250ml, 330ml, 750ml, 1Liter
Type of bottle: PET Bottle And glass Bottle
